ST10 Series In-Circuit Emulators and Accessories

ST10 and Super10 In-circuit emulator pods ST10 and Super10 In-circuit emulator pod configuration modules ST10 and Super10 code execution real-time triggered trace ST10 and Super10 incircuit emulator pod to target CPU site adapters.

Select an emulator card, in-circuit pod, and configurtion module with our without the optional trace card to configure your emulator.
Or, we would be happy to configure an emulator for your project. 
Email your target processor part number & clock speed


Download the ST Emulator parts list

Part Number In-Circuit Emulator Pod - Required Top Price Shopping Cart
OCELITE The EMUL-ST10-OCELite-PC operates to 100 MHz and supports all Super10 derivatives incorporating the OCELite debug interface. There is Shadow RAM for real-time memory display. The on chip events provides two event levels that detect Instruction Fetch addresses, Read address or Write address AND'd or OR'd with data values to provide complex breakpoints. USB PC interface. Includes the Seehau Debug Environment $2,995.00
POD-ST10-256-50 This pod operates at speeds up to 50 MHz, and has 256 K-Bytes of emulation RAM on the external bus. This RAM can simulate ROM or FLASH on the ST10 32 bit ROM bus. This pod supports the 262, 272, F168, F167, 167CR, 165, 163, 161 V/K/O and the F269. Some derivatives need a daughterboard. This 5 V pod uses the ST10R201 bondout microcontroller. It can support 3 V derivatives with the 3 volt adapter isolator, part number EMUL166-PC-ADP-3V. An adapter is required to connect to the target. Use only the 50-MHz trace board for trace options with this pod. Includes the Seehau Debug Environment $1,995.00
POD-ST10-1M-50 This pod operates at speeds up to 50 MHz, and has 1 Megabyte of emulation RAM on the external bus. This RAM can simulate ROM or FLASH on the ST10 32 bit ROM bus. This pod supports the 262, 272, F168, F167, 167CR, 165, 163, 161 V/K/O and the F269. Some derivatives need a daughterboard. This 5 V pod uses the ST10R201 bondout microcontroller. It can support 3 V derivatives with the 3 volt adapter isolator, part number EMUL166-PC-ADP-3V. An adapter is required to connect to the target. Use only the 50-MHz trace board for trace options with this pod. Includes the Seehau Debug Environment $2,495.00
POD-ST10-1M-50N This pod operates at speeds up to 50 MHz, and has 1 Megabyte of emulation RAM on the external bus. This RAM can simulate ROM or FLASH on the ST10 32 bit ROM bus. This pod supports the 262, 272, F168, F167, 167CR, 165, 163, 161 V/K/O, F269, ST10F276, ST10F280, ST10F271Z, ST10F272Z, ST10F273Z, ST10F272-E, & ST10F272-B Some derivatives need a daughterboard. This 5 V pod uses the ST10R201 bondout microcontroller. It can support 3 V derivatives with the 3 volt adapter isolator, part number EMUL166-PC-ADP-3V. An adapter is required to connect to the target. Use only the 50-MHz trace board for trace options with this pod. Includes the Seehau Debug Environment $5,995.00
POD-ST10-FA-256-80 This pod operates at speeds up to 80 MHz. It has 256K of emulation RAM on the external bus and 256K of emulation RAM internal to the bondout chip on the internal ROM bus. This pod is equipped with a 20-MHz oscillator to achieve 80 MHz without a target. This pod supports the 262, 272, C161O-3V, C165 and the C165-3V. Some derivatives need a daughterboard This 3.3 V pod uses the ST10R202 bondout microcontroller. This pod WILL NOT support 5 V designs. An adapter is required to connect to the target Use only the 80-MHz trace board for trace options with this pod. Includes the Seehau Debug Environment $2,495.00
POD-ST10-FA-256-100 This pod operates at speeds up to 100 MHz. It has 256K of emulation RAM on the external bus and 256K of emulation RAM internal to the bondout chip on the internal ROM bus. This pod is equipped with a 20-MHz oscillator to achieve 80 MHz without a target. This pod supports the 262, 272, C161O-3V, C165 and the C165-3V. Some derivatives need a daughterboard This 3.3 V pod uses the ST10R202 bondout microcontroller. This pod WILL NOT support 5 V designs. An adapter is required to connect to the target Use only the 100-MHz trace board for trace options with this pod. Includes the Seehau Debug Environment $2,695.00
POD-ST10-1M-FA-80 This pod operates at speeds up to 80 MHz. It has 1 MB of emulation RAM on the external bus and 256K of emulation RAM internal to the bondout chip on the internal ROM bus. This pod is equipped with a 20-MHz oscillator to achieve 80 MHz without a target. This pod supports the 262, 272, C161O-3V, C165 and the C165-3V. Some derivatives need a daughterboard. This 3.3 V pod uses the ST10R202 bondout microcontroller. This pod WILL NOT support 5V designs. An adapter is required to connect to the target Use only the 80-MHz trace board for trace options with this pod. Includes the Seehau Debug Environment $3,000.00
POD-SUPER10-256-100 This pod operates at speeds up to 100 MHz. It has 256K of emulation RAM on the external bus. This pod is equipped with a 20-MHz oscillator to achieve 50 MHz without a target. The emulator contains 512 Kbytes of static RAM inside the bondout chip and is connected to the internal 64 bit ROM bus. This pod uses the ST10R302 bondout microcontroller. Includes the Seehau Debug Environment $11,500.00


Part Number Optional Real-time Triggerd Trace History   Top Price Shopping Cart
EMUL-ST10-PC/TR-ST10R-201 50-MHz trace with 128K deep buffer. This trace can trigger and filter on code execution data, read and write addresses and on data values. It features an advanced seven level trigger and filter function which includes two timers. $1,195.00
EMUL-ST10-PC /TR-ST10-FA 80-MHz trace with 128K deep buffer. This trace can trigger and filter on code execution data, read and write addresses and on data values. $2,500.00
EMUL-Super10-PC /TR128-100 100-MHz trace with 128K deep buffer. This trace can trigger and filter on code execution, read and write operations including the data values. $11,500.00


Part Number Configuration Modules Top Price Shopping Cart
EMUL166-PC/ADP-3V This mezzanine board inserts between the emulator and the target adapter to provide 3-volt target operation.  Supports the C161 and C165, C166 and ST10 3-volt versions.  There are jumpers to allow any parallel port in its entirety to be disconnected from the target. $395.00
EMUL-PC/XRAM Optional daughterboard that supports up to 16K of RAM located on the XBUS for 5 volt designs. $395.00
EMUL-PC/XRAM-3.3-8 Optional daughterboard that supports up to 16K of RAM located on the XBUS for 3.3v to 3.8 volt designs. $395.00
EMULST10-PC/XP167 This daughterboard is required to emulate the ST10x167 or the C167CR. It fits on header J1 of the ST10 pod board and gives the ability to emulate the CAN module in the C167CR. $395.00
EMULST10-PC /XP168 This daughterboard is required to emulate the ST10x168 or the C168CR. It fits on header J1 of the ST10 pod board and gives the ability to emulate the CAN module in the C167CR. $395.00


Top Shopping home page ICE Technology - Nohau Home Page
Let us help. Call 800.686.6428 - International 650.375.0409
Nohau Technical Links Related Site Links - Compilers Etc. Adapters
Software Updates
Technical Publications
Technical Application Notes
Emulator User Manuals
Target to ICE Pod Adapter Drawings
Site Links
Software Vendors Links
Silicon Vendors
Emulation Technology
Adapters.com
Aprilog
Google